// --------------------------------------------
//    Help for DV_Monitor 8
//    as of November 17 2007
// --------------------------------------------
//
1. Preparations

1.1 D-STAR DV adapter.
1.2 FT-817 or FT-897 with the interface cable(CT-58)
1.3 Prepare repeater list for your domestic D-STAR network.
    Format = Call_Area, Name of repeater, Frequency in kiloHeltz, Repeater shift,
             Repeater callsign(or None), Gateway callsign(or None).
             Each entry shall be separated by COMMA, SPACE or Carriage return.

2. Operations

2.1 my Callsign :  Enter your callsign with in 8 characters.
                   Example : 7L1RLL D

2.2 slash       :  Enter your addtional callsign within 4 characters.
                   Example: F817, 430.

2.3 Call area   :  Select one of pre-defined callarea and double click to
                   deside your location to operate your tranceiver.
                   Example : Simplex, JP1, KH2, ZS5.
                   This selection effects on both my repeaters and his repeaters.

2.4 My Repeater :  Select and double click at one of predefined repeaters or frequency for Simplex.
                   Example : Simplex and 438.010 to your tranceiver as
                   frequency = 438.010MHz, simplex mode.

2.5 His Repeater : Select and double click at one of predefined repeaters.

2.6 DV_port      : Enter a COM port number for DV_adapter in less than 10.
                   Example : number 7 means COM7

2.7 Tranceiver   : Select a tranceiver from None, FT-817 and FT-897.
                   Example : FT-817

2.8 TRX_port     : Enter a tranceiver to be operate with DV adapter.
                   Example : number 8  means COM8.

2.9 START        : (Toggle to STOP)
                   Push to open for communication with DV_adapter and tranceiver.
                   
2.10 STOP        : (Toggle from Start)
                   Push to close connection with both DV_adapter and 
                   tranceiver.

2.11 TRX_Message : Send message to DV_adapter.
                   This operation open for further to study.

2.12 Receiving   : Display receiving callsigns

2.13 Call back   : Call back a callsign specified in receiving data.

3.Specifications

3.1 DV adapter   : Refer The JARL news issued Automn 2007.

3.2 DV_adapter control program :

       URL: http://www1.u-netsurf.ne.jp/~7l1rll/radio.html

4.No warrency

5.Comments
   Any comment will be welcomed by the auther(mailto:7l1rll@jarl.com).